• Proszę skopiować i wkleić treść błędu wyświetloną na ekranie, o ile jakaś się pojawia.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Proszę opisać co chciałeś zrobić, co zrobiłeś i co się stało

• Jaką masz przeglądarkę?

• Proszę skopiować i wkleić tekst wyświetlany w języku angielskim zamiast w twoim języku. Jeśli posiadasz zrzut ekranu przedstawiający ten błąd (dobra praktyka), możesz skorzystać z wybranej przez siebie usługi hostującej zdjęcia (np. snipboard.io), aby go przesłać, a następnie skopiuj i wklej link tutaj. Czy ten tekst jest dostępny w systemie tłumaczeń? Jeśli tak, to czy został przetłumaczony więcej niż 24 godziny temu?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?

• Wyjaśnij swoją propozycję precyzyjnie i zwięźle, tak aby jak najłatwiej zrozumieć, co masz na myśli.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?

• Co wyświetlało się na ekranie kiedy zostałeś zablokowany (Pusty ekran? Część interfejsu gry? Komunikat o błędzie?)

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?

• Która z zasad gry nie była przestrzegana w adaptacji BGA

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Czy naruszenie zasad gry jest widoczne w powtórce rozgrywki? Jeżeli tak, to w ruchu o jakim numerze?

• Jaką masz przeglądarkę?

• Jaką akcję w grze chciałeś wykonać?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Co starasz się zrobić by uruchomić tę akcję w grze?

• Co się stało kiedy próbowałeś to zrobić (komunikat o błędzie, komunikat na pasku stanu gry, ...)?

• Jaką masz przeglądarkę?

• W którym momencie gry pojawił się problem (jakie było aktualne polecenie w grze)?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Co się stało kiedy próbowałeś wykonać akcję w grze (komunikat o błędzie, komunikat na pasku stanu gry, ...)?

• Jaką masz przeglądarkę?

• Proszę opisać problem z wyświetlaniem. Jeśli posiadasz zrzut ekranu przedstawiający ten błąd (dobra praktyka), możesz skorzystać z wybranej przez siebie usługi hostującej zdjęcia (np. snipboard.io), aby go przesłać, a następnie skopiuj i wklej link tutaj.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?

• Proszę skopiować i wkleić tekst wyświetlany w języku angielskim zamiast w twoim języku. Jeśli posiadasz zrzut ekranu przedstawiający ten błąd (dobra praktyka), możesz skorzystać z wybranej przez siebie usługi hostującej zdjęcia (np. snipboard.io), aby go przesłać, a następnie skopiuj i wklej link tutaj. Czy ten tekst jest dostępny w systemie tłumaczeń? Jeśli tak, to czy został przetłumaczony więcej niż 24 godziny temu?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?

• Wyjaśnij swoją propozycję precyzyjnie i zwięźle, tak aby jak najłatwiej zrozumieć, co masz na myśli.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Jaką masz przeglądarkę?